BVYXH - TONER FOR LZR 650 PRINTER, ST9500, 5300
- MSDS: BVYXH
- Manufacturer: ARLINGTON INDUSTRIES INC
- Product Name: TONER FOR LZR 650 PRINTER, ST9500, 5300
- National Stock Number: 6850-00N054907
Product Identification
Product ID:TONER FOR LZR 650 PRINTER, ST9500, 5300
MSDS Date:08/01/1990
FSC:6850
NIIN:00N054907
MSDS Number: BVYXH
Responsible Party
LINCOLNSHIRE, IL 60069
US
Emergency Phone: 800-323-4147
Info Phone: 800-323-4147
Cage: ARLIN
Contractor
Telephone: 708-913-1666
Cage: ARLIN
Ingredients
STYRENE ACRYLATE
CAS: 67953-61-1
Fraction By Weight: 63.5%
OSHA PEL N/K
ACGIH TLV: N/K
PROPENE POLYMERS; (POLYPROPYLENE)
CAS: 9003-07-4
RTECS: UD1842000
Fraction By Weight: 3.5%
OSHA PEL N/K
ACGIH TLV: N/K
MAGNETITE
CAS: 1309-38-2
RTECS: OM4800000
Fraction By Weight: 32%
OSHA PEL N/K
ACGIH TLV: N/K
METAL COMPLEX OF AZO COMPOUND
Fraction By Weight: 1%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MINIMAL IRRITATION TO RESPIRATORY
TRACT MAY OCCUR AS WITH EXPOSURE TO ANY NON-TOXIC DUST.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ACCUMULATION OF DUST IN THE
RESPIRATORY SYSTEM.
First Aid
First Aid:SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD . INGESTION:
RINSE MOUTH WITH WATER. CALL MD. INHALATION: REMOVE TO FRESH AIR.
IF EFFECTS OCCUR, CONSULT LOCAL MEDICAL PERSONNEL. EYES: IN CASE OF
CONTACT, IMMEDIATELY FLUSH EYES WITH WATER FOR AT LEAST 15
MINUTES.
Fire Fighting
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM OR WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:SWEEP UP OR CLEAN UP WITH A VACUUM CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED UNDER NORMAL USE. USE NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE REQUIRED UNDER NORMAL USE.
Protective Gloves:NONE REQUIRED UNDER NORMAL USE.
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NONE REQUIRED UNDER NORMAL USE.
Work Hygienic Practices:INHALATION SHOULD BE AVOIDED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Spec Gravity:1.47
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE, BLACK POWDER; PRACTICALLY ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, NOX.
Disposal
Waste Disposal Methods:WASTE MATERIAL MAY BE DUMPED OR INCINERATED
UNDER CONDITIONS WHICH MEET ALL REGULATIONS. COMPLY WITH ALL
FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.